Titan 19123 - Gravity Feed H.V.L.P. 2.3mm Needle & Nozzle Spray GunIncludes locking pressure regulator with gauge1000 ml aluminum paint cupSpray pattern control knob on side of gunsAir Inlet: 1/4″Operating pressure: 15 - 45 P.S.I.Avg. Air consumption: 7.0 - 9.0 C.F.M.

Click here to buy

More info: Titan 19123 Gravity Feed H.V.L.P. 2.3mm Needle & Nozzle Spray Gun

• Titan 19114 Gravity Feed H.V.L.P. 1.4mm Needle & Nozzle Spray Gun
• Titan 19220 4 pc H.V.L.P. Triple Set-Up Spray Gun Kit
• Titan 19000 HVLP Gravity Feed Spray Gun
• Porter-Cable PSH1 Gravity Feed Spray Gun, 8.5 CFM
• Porter-Cable PSH3 Gravity Feed Spray Gun

-MK Diamond ceramic, stone, and glass blades blend superlative quality, performance, and value. These blades are manufactured to exact tolerances to ensure precise cutting, clean-cut edges, and long service life. They can cut through any type of ceramic t

Click here to buy

More info: MK Diamond 157667 10″ Tile Blade

• MK Diamond 157667 10″ Tile Blade
• MK Diamond 153495 MK-415 10″ Supreme Tile Wet Cutting Super Hi-Rim Diamond Blade
• MK Diamond 157511 MK-415 7″ Supreme Tile Wet Cutting Super Hi-Rim Diamond Blade
• MK Diamond 128074 MK-215 10″ Supreme Tile & Marble Wet Cutting Diamond Blade
• MK Diamond 150167 MK-600W 14″ Green Concrete Wet Cutting Diamond Blade

Sands flush and into corners Orbital motion produces fine finishing and swirl-free results Easy, one-hand, palm-operated trigger Ideal for finish sanding

Click here to buy

More info: Porter-Cable ETS2 Ex-Cell Jitterbug Air Sander, 8000 RPM

• Porter-Cable ETS2 Ex-Cell Jitterbug Air Sander, 8000 RPM
• Porter-Cable ETS1 Ex-Cell 6 inches D.A Air Sander
• Porter-Cable ETD381 3/8 inches Ex-Cell Reversible Drill
• Porter-Cable 342K 1/4 Sheet Palm Sander Kit
• Porter-Cable ETK20 Ex-Cell 72 Piece Air Tool Kit, 7000 RPM

The SK Hand Tool 85609 is a 1″ F - 3/4″ M Drive Impact Adapter. It combines the versatility provided by an adapter with the accessibility provided by an extension. The adapter is specifically designed for transmission applications. The black coating retains more rust preventative compound than black oxide.

Click here to buy

More info: SK Hand Tool 85609 1″ F - 3/4″ M Drive Impact Adapter

• SK Hand Tool 85609 1″ F - 3/4″ M Drive Impact Adapter
• SK Hand Tool 46164 4-Pc 1/2″ Drive Impact Extension Set
• SK Hand Tool 87914 14-Pc 3/4″ Drive Deep Fractional Impact Socket Set
• SK Hand Tool 4035 15-Pc 1/2″ Drive Standard Fractional Impact Socket Set
• SK Hand Tool 4003 3-Pc Impact Universal Joint Set

#NAME?

Click here to buy

More info: Silky Saws 121-30 GOMBOY 300 Large Teeth

• Silky Saws 121-27 GOMBOY 270 Large Teeth
• Silky Saws 121-30 GOMBOY 300 Large Teeth
• Silky Saws 275-39 IBUKI 390 Large Teeth
• Silky Saws 131-37 ZORIN 370 Large Teeth
• Silky Saws 131-34 ZORIN 340 Large Teeth

Stabila 29036 36in. Type 80A-2 3-Vial Contractor’s Level has a contoured box beam frame. Solid acrylic vials with spring steel hairline indicators inside vials for accurate reading. The product is designed for the tile installers and everyday use.

Click here to buy

More info: Stabila 29036 36in. Type 80A-2 3-Vial Contractor’s Level

• Stabila 29036 36in. Type 80A-2 3-Vial Contractor’s Level
• Stabila 29048 48″ Type 80A-2 3-Vial Contractor’s Level
• Stabila 29816 2-Pc Type 80A-2 48″ & 16″ General Purpose Level Set
• Stabila 29248 80A-2M 48in General Purpose Level
• Stabila 29224 80A-2M 24in General Purpose Level

-60 LED Worklight runs for 4 hours-20 LED Flashlight runs for 12 hours-Approximately 240 Lumens, brighter than any LED flashlight-Can run or recharge off 120VAC-12 Volt Car Lighter Adapter Included! Can run or recharge off 12VDC-Recharges in 90 minutes!-

Click here to buy

More info: TerraLux TLW80 60 LED Worklight W/20 LED Flashlight

• TerraLux TLW80 60 LED Worklight W/20 LED Flashlight
• Ryobi ZRP841 Factory Reconditioned One+™ 18-Volt Cordless 4-Piece Super Combo Kit
• Ryobi ZRP804 Factory Reconditioned One+™ 18-Volt Cordless 4-Piece Combo Kit
• TD Industrial 10095 Generator (5000W)
• McCulloch MD7807KM 14.4 Volt Cordless 1/4″ Impact Driver

Milwaukee 48-40-4168 is a 10″ 80 Carbide Teeth Circular Saw Blade. The endurance blade offer faster cutting and extra long life for contractors. Carbide teeth made of C-3 grade micro ground carbide with an alternate top bevel grind keep the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life.

Click here to buy

More info: Milwaukee 48-40-4168 10″ 80 Carbide Teeth Circular Saw Blade

• Milwaukee 48-40-4168 10″ 80 Carbide Teeth Circular Saw Blade
• Milwaukee 48-40-4005 6-1/2″ 60 Carbide Teeth Circular Saw Blade
• Milwaukee 48-40-4510 14″ 90 Teeth Dry Cut Carbide Tipped Circular Saw Blade
• Milwaukee 48-40-4515 8″ 42 Teeth Cermet Tipped Metal Cutting Circular Saw Blade
• Milwaukee 48-40-4505 14″ 72 Carbide Tipped Dry Metal Cut Circular Saw Blade

#NAME?

Click here to buy

More info: Silky Saws 102-21 GOMTARO 210 Large Teeth

• Silky Saws 102-21 GOMTARO 210 Large Teeth
• Silky Saws 104-27 GOMTARO 270 Fine Teeth
• Silky Saws 275-39 IBUKI 390 Large Teeth
• Silky Saws 131-37 ZORIN 370 Large Teeth
• Silky Saws 131-34 ZORIN 340 Large Teeth

The SK Hand Tool 88234 is a 1-1/16″ SuperKrome Fractional Combination Wrench. It features high polish SuperKrome finish, which protects the tools from the harsh working environments found in today’s workplace, while providing long life and maximum corrosion resistance. The patented SureGrip wrenching design on wrench box ends drives the side of the hex of the fastener, not the corner, to increase torque and avoid edge breakage, especially on rusted or damaged fasteners. Its box ends are also countersunk to help lead the wrench over fastener heads. The heads are angled 15 for greater access. Open ends also feature a smooth arc radius design for improved strength and durability. The handle edges are rounded for improved gripping and increased user comfort.

Click here to buy

More info: SK Hand Tool 88234 1-1/16″ SuperKrome Fractional Combination Wrench

• SK Hand Tool 88246 1-7/16″ SuperKrome Fractional Combination Wrench
• SK Hand Tool 88236 1-1/8″ SuperKrome Fractional Combination Wrench
• SK Hand Tool 88242 1-5/16″ SuperKrome Fractional Combination Wrench
• SK Hand Tool 88244 1-3/8″ SuperKrome Fractional Combination Wrench
• SK Hand Tool 88240 1-1/4″ SuperKrome Fractional Combination Wrench

#NAME?

Click here to buy

More info: Silky Saws 104-27 GOMTARO 270 Fine Teeth

• Silky Saws 104-27 GOMTARO 270 Fine Teeth
• Silky Saws 108-30 GOMTARO 300 PRO-SENTEI
• Silky Saws 102-21 GOMTARO 210 Large Teeth
• Silky Saws 153-24 GOMTARO 240 Root Cutting
• Silky Saws 151-30 MASTER 300 Fine Teeth

These belts are pre-cut to length with tapered ends for easy installation. These Belts are Designed for a 55220 26″ Dual Drum Sander

Click here to buy

More info: Steel City 55311 3 Pack of 220 Grit Sanding Belts

• Steel City 55307 3 Pack of 80 Grit Sanding Belts
• Steel City 55310 3 Pack of 180 Grit Sanding Belts
• Steel City 55311 3 Pack of 220 Grit Sanding Belts
• Steel City 55328 2 Pack of 120 Grit Sanding Belts
• Steel City 55325 2 Pack of 60 Grit Sanding Belts

The OTC 7208A is a Front Hub Puller with Spare Locknut. The 7208 puller removes front hubs without damaging the wheel bearing. Its universal design fits most FWD cars. The spare locknut allows to using with a standard slide hammer puller for rear axle flanges.

Click here to buy

More info: OTC 7208A Front Hub Puller with Spare Locknut

• OTC 7208A Front Hub Puller with Spare Locknut
• OTC 7901 Front Hub Puller for 4WD Vehicles
• SPX OTC7374 Rear Axle Pulling Plate w/5 lbs Slide Hammer Assembly
• OTC 7948 Silver Slapper 10 Way Slide Hammer Puller Set
• OTC 7947 8 Way Slide Hammer Puller Set

These belts are pre-cut to length with tapered ends for easy installation. These Belts are Designed for a 55220 26″ Dual Drum Sander

Click here to buy

More info: Steel City 55310 3 Pack of 180 Grit Sanding Belts

• Steel City 55307 3 Pack of 80 Grit Sanding Belts
• Steel City 55310 3 Pack of 180 Grit Sanding Belts
• Steel City 55311 3 Pack of 220 Grit Sanding Belts
• Steel City 55328 2 Pack of 120 Grit Sanding Belts
• Steel City 55325 2 Pack of 60 Grit Sanding Belts

Stabila 30045 Plate Level case made to hold the Stabila 33610 Plate Level. Case has a durable exterior and a soft padded interior. Also has two additional pockets to hold a 24″ level and a 48″ level.

Click here to buy

More info: Stabila 30045 Plate Level case for 33610 Plate Level.

• Stabila 30045 Plate Level case for 33610 Plate Level.
• Stabila 30033 96″ Level Case (fits 5′ - 8′ levels)
• Stabila 32610SC Magnetic Plate Level Expandable 6 to 10 Feet with Soft Case
• Stabila 33712SC Non-Magnetic Plate Level Expandable 7 to 12 Feet with Soft Case
• Stabila 33610SC Non-Magnetic Plate Level Expandable 6 to 10 Feet with Soft Case

-Excellent For detail work and finishing-Variable speed throttle for better control and to match job application-90 degree angle head design allows use in confined areas-Free speed: 20,000 rpm-Chuck capacity: 1/4″

Click here to buy

More info: Mechanics M656 1/4″ Angle Head Die Grinder

• Mechanics M656 1/4″ Angle Head Die Grinder
• Mechanics M658 4″ Air Angle Grinder With Guard
• Porter-Cable PTX2 Air Rotary Angle Grinder, 22000 RPM
• Milwaukee 0370-20 3/8″ Close Quarter Angle Drill, 0-1300 RPM
• Metabo W14-150 Ergo 6″ 12amp Angle Grinder, Order Number 606251420

Qual Craft 2571P 27-1/2 inch Strip Fast Shingle Remover Shovel - Boxed

Click here to buy

More info: Qual Craft 2571P 27-1/2 inch Strip Fast Shingle Remover Shovel - Boxed

• Qual Craft 2571P 27-1/2 inch Strip Fast Shingle Remover Shovel - Boxed
• Qual Craft 2571 27-1/2 inch Strip Fast Shingle Remover Shovel
• Qual Craft 2570P 47-1/2 inch Strip Fast Shingle Removal Shovel - Boxed
• Qual-Craft 2560P 54inch. Shingle Remover Shovel (10 Heat Treated Teeth) - 6 Pack
• Qual-Craft 2561 47inch. Shingle Remover Shovel (10 Teeth) - 6 Pack

Adjustable seat

Click here to buy

More info: TD Industrial 10373 Adjustable Seat

• TD Industrial 10373 Adjustable Seat
• TD Industrial 10050 Tri-Cycle
• Wesco Industrial 272744 Deluxe Adjustable Fork Pallet Truck
• Qual-Craft 2620 Adjustable Wall Brace - 2 Pack
• SK Hand Tool 8012 12-1/4″ Standard Finish Adjustable Wrench

Stabila 30015 5-Pocket Carrying Case Fits 48 in., 32 in., 24 in., 16 in., and Torpedo Levels.

Click here to buy

More info: Stabila 30015 5-Pocket Case Fits 48″,32″,24″,16″ Torpedo - Level Case

• Stabila 30015 5-Pocket Case Fits 48″,32″,24″,16″ Torpedo - Level Case
• Stabila 30033 96″ Level Case (fits 5′ - 8′ levels)
• Stabila 59096 Type 96M 5 Pc Magnetic Level Set
• Stabila 37240 2-Piece Level Set with 24-Inch Builder’s Level and 10-Inch Torpedo Level
• Stabila 37496C 96-Inch Type 196 Non-Magnetic Builder’s Level with Carrying Case

The Robinair 34065 is a R-134a Oil Injector with 1/2″ Acme Fitting. It takes just seconds to transfer an oil charge while the system is in a vacuum. The injector is great add-ons to recovery/recycling and charging. It is made of durable polypropylene with oil levels marked in ounces and milliliters. It features solid brass fitting with a Lexan handwheel.

Click here to buy

More info: Robinair 34065 R-134a Oil Injector with 1/2″ Acme Fitting

• Robinair 34065 R-134a Oil Injector with 1/2″ Acme Fitting
• Robinair 34970 Air-Vac for R-12 and R-134a
• Robinair 43678B Dial-A-Change 5 Lbs Heated Charging Cylinder for R-12
• Robinair 34205A Dial-A-Charge Heated Charging Cylinder for R-134a
• Robinair 41630 R12 Side Wheel Manifold with Standard Hoses

Front activation pin on the magazine helps prevent accidental staple firingShoots up to 9/16″ staples to handle a wide variety of fastening applicationsEasy-to-load magazine accommodates up to 84 staplesDepth-adjustment knob helps you set the depth of the stapleOvermold grip for increased user comfort

Click here to buy

More info: Ryobi ZRP301 Factory Reconditioned One+™ 18-Volt Cordless Standard Crown Stapler

• Ryobi ZRP301 Factory Reconditioned One+™ 18-Volt Cordless Standard Crown Stapler
• Ryobi ZRP824 Factory Reconditioned One+™ 18-Volt Cordless 2-Piece Starter Kit
• Ryobi ZRP804 Factory Reconditioned One+™ 18-Volt Cordless 4-Piece Combo Kit
• Ryobi ZRP230 Factory Reconditioned 18-Volt One+™ Cordless 1/4″ Impact Driver, 2400 RPM
• Porter-Cable NS100A Factory Reconditioned 1 inch Narrow Crown Stapler - Tool Only

Range (mm/in): 0-200/0-8″ Precision (mm/in): 0.01/0.0005″

Click here to buy

More info: TD Industrial 20132 8 inch Digital Caliper, Super Large LCD

• TD Industrial 20132 8 inch Digital Caliper, Super Large LCD
• TD Industrial 20133 12 inch Digital Caliper, Super Large LCD
• Milwaukee 8988-20 Variable Temperature Heat Gun, 12.5 Amps
• SPX OTC3182 130 Amps Digital Battery Load Tester
• SPX OTC3367 Digital Timing Light

-Extra long tool bag with cavernous 24″ x 11″ x 9″ main compartment is large enough to accommodate a reciprocating saw with blade installed. An internal divider adjusts to keep tools secure and orderly. Use the GateMouth® Long Boy’s 14 pockets to organiz

Click here to buy

More info: Pull’R Holdings 06049 Gatemouth Long Boy

• Pull’R Holdings 06049 Gatemouth Long Boy
• Pull’R Holdings 06400 Tool Boss Vertical Tool Organizer w/Gatemouth
• Pull’R Holdings 55035 Mullet Buster Tool Belt
• Pull’R Holdings 88427 U.S. Leather Carpenter’s Apron
• Milwaukee 49-17-0195 Heavy-Duty 33 Pocket/5 Piece Tool Belt

-This heavy-duty woodworking saw is a favorite of carpenters and joiners-The aggressive tooth pattern is not too coarse, not too fine-and the compact blade profile allows cutting where other saws can’t reach-The wide durable blade is ideal for rough cutti

Click here to buy

More info: Silky Saws 151-30 MASTER 300 Fine Teeth

• Silky Saws 151-30 MASTER 300 Fine Teeth
• Silky Saws 149-36 MASTER 360 Large Teeth
• Silky Saws 155-30 MASTER 300 Large Teeth
• Silky Saws 168-24 GUNMAN 240 Fine Teeth
• Silky Saws 275-39 IBUKI 390 Large Teeth

3-conductor, 12 gauge extra heavy duty, SJTW wire Manufactured with solid molded 3-outlet plugs 300 volt wire rating UL Listed Meets OSHA specifications

<